Gateway > Wan Page - Motorola SBG1000 User Manual

Overview Installation Troubleshooting Contact
Gateway > WAN Page
Use this page to configure the external (public) wide area network (WAN) interface:
Gateway > WAN page fields
Field Description
Host Name If the cable service provider requires a
they provided in this field. The default is None.
Enable DHCP Client Enabling the DHCP client causes the wireless gateway to automatically obtain the
address,
enabled if the cable service provider automatically assigns a public IP address from their
DHCP server. Enable DHCP Client is on by default.
Disable DHCP Client If the cable service provider does not automatically assign a public IP address using DHCP,
they must provide a
DHCP client, you must type the static IP address, subnet mask, DNS server(s), and domain
name (if necessary) in the fields provided. Disable DHCP Client is off by default.
Static IP Address If Disable DHCP Client is on, type the static IP address provided by the cable service provider,
in
Static IP Address If Disable DHCP Client is on, type the subnet mask associated with the static IP address, in
Subnet Mask dotted-decimal format. The default is None.
Domain Name If the cable service provider requires a domain name, type the domain name they provided you
in this field. The default is None.
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
subnet mask, domain
static IP
dotted-decimal format. The default is None.
X
45
Exit
FAQ
hostname to access to their network, type the hostname
name, and DNS server(s). Most commonly, the DHCP client is
address. Select Disable DHCP Client. When you disable the
SBG1000 Wireless Cable Modem Gateway User Guide
Specifications Glossary License
public IP