Specifi Cations - Kenwood R-K711 Instruction Manual

Specifi cations

Main unit
[Amplifi er]
Eff ective output power during STEREO operation
.....................................30 W + 30 W RMS (1 kHz, 10 % T.H.D., 6 Ω)
Total harmonic distortion .........................0.005% (1 kHz, 15 W, 6 Ω)
Tone control characteristics
BASS
(TURN OVER 100 Hz) ........................................ ±3.0 dB (at 100 Hz)
(TURN OVER 150 Hz) ....................................... ±5.0 dB (at 100 Hz)
(TURN OVER 200 Hz) ....................................... ±5.6 dB (at 100 Hz)
MID
(TURN OVER 1 kHz) ..............................................±6.0 dB (at 1 kHz)
(TURN OVER 2 kHz) ..............................................±6.0 dB (at 2 kHz)
(TURN OVER 3 kHz) ..............................................±6.0 dB (at 3 kHz)
TREBLE
(TURN OVER 5 kHz) ............................................±5.6 dB (at 10 kHz)
(TURN OVER 7 kHz) ............................................±4.9 dB (at 10 kHz)
(TURN OVER 10 kHz) .........................................±3.0 dB (at 10 kHz)
D-Bass (+10) .................................................... +13.5 dB (40 Hz, Vol. 60)
Input terminals (Sensitivity/Impedance)
PHONO (MM) .................................................................. 9 mV / 31 kΩ
LINE (AUX, TAPE) ....................................................... 450 mV / 22 kΩ
LINE (D.AUDIO) ......................................................... 250 mV / 11 kΩ
Output terminals (Level/Impedance)
TAPE .............................................................................. 450 mV / 200 Ω
SUB WOOFER PRE OUT .................................................... 2 V / 620 Ω
[Digital unit]
Sampling frequencies
.................................... 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Supreme EX (CD, D-IN)
Playable frequencies ................................................... 1 Hz – 44 kHz
Digital input terminals (Sensitivity/Wave length)
Optical ............................... –15 dBm – –24 dBm, 660 nm ±30 nm
78
R-K711
[Tuner]
FM tuner
Reception frequency range ...................87.5 MHz to 108.0 MHz
AM tuner
Reception frequency range ....................... 531 kHz to 1,602 kHz
[CD player]
Scanning method .................................................Semiconductor laser
D/A Conversion .....................................................................................1 bit
Oversampling .........................................................128 fs (11289.6 kHz)
Frequency response ......................................................20 Hz to 20 kHz
Signal to noise ratio (TAPE REC OUT) ................. More than 104 dB
[Power Supply, etc.]
Power consumption ........................................................................... 70 W
Power consumption (Standby) ........................................ 0.3 W or less
Dimensions
Width ........................................................................270 mm (10-5/8")
Height .................................................................... 126 mm (4-15/16")
Depth........................................................................369 mm (14-1/2")
Weight (net) ..................................................................... 5.6 kg (12.35 lb)
Design and specifications are subject to change without
notice.
Full performance is not guaranteed in extremely cold
environments (under water-freezing temperatures).