D.audio; Playback From A Digital Audio Player - Kenwood R-K711 Instruction Manual

Compact hi-fi component system
Table of Contents

Advertisement

D.AUDIO

You can connect a Kenwood digital audio player (referred to hereafter simply as "digital audio player") to
the system and use it to play tracks.
44
R-K711

Playback from a Digital Audio Player

Use this procedure to connect a digital audio player to the system and use it
to play tracks.
When connecting the digital audio player, always turn this system and the digital audio
player off beforehand.
Refer also to the instruction manual for the digital audio player to be connected.
Connecting the digital audio player using the dedicated cable allows you to operate the
digital audio player using the main unit or the remote control.
Compatible Kenwood digital audio players
HDD audio player
HD20GA7
1
1
Connect the digital audio player to the [D.AUDIO IN]
terminal on the rear panel of the main unit.
2
2
Turn on the digital audio player.
3
3
Press the [D.AUDIOE] key to begin playback.
Simply pressing the [D.AUDIOE] key turns on the system and begins
playback.
If the digital audio player is not connected using the dedicated cable, use the
controls on the connected digital audio player.
If you use the dedicated cable for the connection, the volume and sound quality
settings on the digital audio player are disabled.
When you have fi nished using the digital audio player, disconnect the player's
connection cable from the [D.AUDIO IN] terminal.
Memory audio player
M1GC7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

K-711

Table of Contents