Kenwood R-K711 Instruction Manual page 74

Troubleshooting
CD
Symptoms
I insert a CD
but it won't play.
There is no sound.
Playback skips.
I can't play some audio
fi les.
There is a delay until
playback starts.
The TAG information is
not displayed correctly.
Components connected to the D.AUDIO IN terminal
Symptoms
I can't use the remote
control or main unit to
control my Kenwood
digital audio player.
Remote control
Symptoms
The remote control does
not work.
74
R-K711
Solution
Load the disc correctly with the label side facing upward.
Clean the disc. (See "Care and Storage".)
Allow any condensation to evaporate. (See "Be careful
against condensation".)
Press the [CDE] key.
Clean the disc. (See "Care and Storage".)
Clean the disc. (See "Care and Storage".)
The system will not play audio fi les that are corrupted.
Check that the system can play the audio fi le.
There may be a delay prior to playback if there are large
numbers of folders.
Refer to "Supported Audio Files" to check which TAG
information can be displayed on this system.
Solution
Connect the player using the dedicated cable.
Check whether the connected model is compatible.
Solution
Insert new batteries.
Use the remote control from within its eff ective range.
Ref. page
26
77
77
26
77
77
23
30
23
Ref. page
12
44
Ref. page
17
17