Kenwood R-K711 Instruction Manual page 66

Setting the Timer
66
R-K711
12 12
Press the power [K] key to turn the power OFF.
The [STANDBY/TIMER] indicator on the main unit lights orange.
If the indicator lights red, set the clock to the correct time.
To cancel (off ) or reset (on) the timer
When the system is turned on, press the [TIMER] key.
The setting changes each time you press the [TIMER] key.
PROG. 1 set to on
Timer off
If there has been a power failure or the system was unplugged from
the wall outlet for some time, the [STANDBY/TIMER] indicator lights
red. In that case, set the time again. (P.69)
To modify the program settings, redo the timer settings from the beginning.
When the system is in Standby mode, you can confi rm the timer setting (on or
off ) for 5 seconds by pressing the [F] key.
lit lit
PROG. 2 set to on
unlit
PROG. 1 and 2 set to
on
lit