Download  Print this page

Kenwood KTF-2010 Instruction Manual page 18

Fm/mw/lw tuner
Hide thumbs

Advertisement

18
KTF-3010
FM tuner section
Tuning frequency range ......................... 87.5 MHz ~ 108 MHz
Usable sensitivity (DIN)
MONO
.................. 1.3µV(75 )/13.5 dBf(40 kHz dev., S/N 26 dB)
STEREO
................... 50µV(75 )/45.2 dBf(46 kHz dev., S/N 46 dB)
Limiting level (DIN) ................................ 1.0µV(75 )/11.2 dBf
Total harmonic distortion (DIN at 1 kHz)
MONO ................................ 0.08 % (85.2 dBf input, WIDE)
STEREO ............................... 0.2 % (85.2 dBf input, WIDE)
Signal to noise ratio
(DIN weighted at 1 kHz, 40 kHz dev.)
MONO ............................................. 70 dB (85.2 dBf input)
STEREO .......................................... 65 dB (85.2 dBf input)
Stereo separation (DIN)
1 kHz .............................................................. 50 dB (WIDE)
Capture ratio ...................................................... 2.0 dB(WIDE)
Selectivity (DIN ±300 kHz) ................................. 45 dB (WIDE)
(DIN± 200 kHz) ......................... 55 dB (NARROW)
Image rejection ratio (at 98MHz) ................................... 85 dB
IF rejection ratio (at 98MHz) ......................................... 105 dB
Spurious rejection ratio (at 98MHz) ............................ 105 dB
AM suppression ratio ..................................................... 68 dB
Sub carrior suppression ratio (DIN) ............ 55 dB (at 19 kHz)
Frequency response
(30 Hz ~ 15 kHz) ....................................... +0.5 dB, –1.5 dB
Output level / impedance (FM at 1 kHz, 75 kHz dev.)
Fixed ................................................................. 0.6 V/600
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed with-
out notice.
Note
Note
2. The full performance may not be exhibited in extremely coud location (under a water-freezing temperature).
MW (AM) tuner section
Tuning frequency range .......................... 531 kHz ~ 1,602 kHz
Usable sensitivity
(at 30 % mod., S/N 20 dB) .................... 12 µV/(400 µV/m)
Signal to noise ratio
(at 30 % mod., 1mV input) ......................................... 50 dB
Total harmonic distortion ................................................ 0.4 %
Image rejection ratio ....................................................... 30 dB
Selectivity ......................................................................... 30 dB
Output level / impedance
(at 30 % mod., 1mV input) ........................... 0.18 V/600
LW (for U.K. only) tuner section
Tuning frequency range ............................. 153 kHz ~ 279 kHz
Usable sensitivity
(at 30% mod., S/N 20 dB) .......................................... 22µV
Signal to noise ratio
(at 30% mod., 1mV input) ........................................... 47dB
Total harmonic distortion ................................................. 0.6%
Image rejection ratio ........................................................ 27 dB
Selectivity ......................................................................... 33 dB
Output level/impedance
(at 30% mod., 1mV input) ............................. 0.18 V/600
GENERAL
65 dB (at 38 kHz)
Power consumption .......................................................... 10 W
Dimensions ......................................... W : 440 mm (17-5/16")
Weight (net) ...................................................... 3.3 kg (7.26 lb)
KTF-3010/KTF-2010 (En)
H :
94 mm (3-11/16")
D : 384 mm (15-1/8")

Advertisement

loading

  Related Manuals for Kenwood KTF-2010

This manual is also suitable for:

Ktf-3010