Kenwood KRF-V7070D Instruction Manual page 19

Preparing for surround sound
∧/∨
3 Use the keys or @/# keys to select the speakers and the
MULTI CONTROL knob or Multi (%/fi) keys to adjust the
distance to the front speakers.
The speaker indicator to be adjusted blinks.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L
SL S SB SR
Indication in feet
• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
4 Repeat steps 3 to input the distance for each of the speakers.
5 Press the SETUP key again to return to main setup displays.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
7
Select the display mode.
∧/∨
1 Press the key or @/# keys to select the DISP MODE.
2 Press the SETUP key for the following displays:
1 DISP SELECTOR
2 DISP LISTEN
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the display mode.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
4 Press the SETUP key again to accept the setting.
∧
5 Use the key or # key to select EXIT.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
6 Press the SETUP key to exit the SET UP mode.
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
THX
ACTIVE EQ. MATRIX
Surround EX
DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
Indication in meters
: Displays the current input selector.
: Displays the current listen mode.
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
THX
ACTIVE EQ. MATRIX
Surround EX
DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
THX
ACTIVE EQ. MATRIX
Surround EX
DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
Input level adjustment (analog sources only)
If the input level of an analog source signal is too high, the CLIP indicator
will blink to indicate the source signal. Adjust the input level.
RDS
RTY
AUTO
MEMO
STEREO
1 Use the Input Selector keys to select the source of which the
TUNED
input level you want to adjust.
• You can store a separate input level for each input source.
2 Press the SOUND and
the "INPUT" indication appears.
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the
input level.
SP MUTE
A B CLIP
L C SW R
LFE
SL S SB SR
• The adjustment mode is displayed for approximately 8 seconds.
• The input level may be adjusted to any one of three settings:
0dB, -3dB, and -6dB. (The initial setting is 0dB.)
4 Press the SOUND key again to return to the input indication.
RDS
RTY
AUTO
MEMO
STEREO
TUNED
RDS
RTY
AUTO
MEMO
STEREO
TUNED
SP MUTE OPTICAL 6CH INPUT CINE
AUTO DETECT
ACT
A B CLIP CLIP CLIP
COAXIAL ANALOG 96kHzfs DSP
L C SW R
LFE
SL S SB SR
∧/∨
keys or @/# keys repeatedly until
OPTICAL 6CH INPUT CINEMA EQ. DTS. DOLBY DIGITAL STEREO
AUTO DETECT
ACTIVE EQ. MATRIX
COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS
RDS
NEO:6
THX
RTY
Surround EX
CSII
AUTO
MEMO
STEREO
TUNED
19
EN