Table of Contents
Advertisement
4 P.CALL ¢ keys
During DVD (VCD, CD, MP3), MD playback :
Press to skip in the forward or backward direction.
During tuner reception:
Press to receive a preset station.
DVD/CD 0 key
This key is pressed to remove DVD (VCD, CD, MP3).
MD 0 key
This key is pressed to remove MD.
6
MD insertion slot
7
AUX key
Press when playing or recording the input source
connected to the AUDIO AUX IN (analog) input jacks.
Press when playing or recording the input source
connected to the DIGITAL IN OPTICAL jacks.
SOUND key
Press to adjust the tone.
MODE key
Press to switch the function of the VOLUME/MULTI
CONTROL knob to the menu select mode.
This key is also used when setting the time of the day.
Operation in menu mode
1
Press the MODE key.
2
Select the item to be set.
VOLUME/
MULTI CONTROL
3
Press the SET/ DEMO key.
SET/DEMO
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory.
This is called standby mode. Under the condition, the system can be turned ON by the remote control
unit.
MODE
SET/DEMO key
Press to set or enter an item selected with the
VOLUME/MULTI CONTROL knob.
This key is also used for switching demonstration
on/off.
REC MODE key
Press to switch the MD recording mode.
MD REC key
Press to start MD recording.
8
DVD/CD tray
9
PHONES jack
Plug headphones with a stereo mini-plug (optional).
÷ Open the door to use 7 and 9.
Lower this part to open the door.
Each turn changes the displayed item.
"O.T.E. MODE"
"TRACK MARK"
(Only when REC INPUT is set to "ANALOG")
"REC INPUT"
(Only when the DVD/CD input is selected)
"REC LEVEL"
"T I M E R SE T "
"A . P . S . "
"I N P U T LEVEL"
(Only when the AUX input is selected)
"BALANCE"
"TIME ADJUST "
"AUTO PRESET "
(Only when the TUNER input is selected)
"DIMMER"
13
Controls and indicators
Advertisement
Table of Contents
