40
Selecting the recording input signal
With recording of CD playback, either the digital output or analog output can be recorded as required.
(In recording of a disc source other than CD on MD, the recording source is set automatically to the
"ANALOG" audio.)
1
Press the DVD/CD 6 key
2
Press the MODE key
3
Turn the VOLUME/MULTI CONTROL knob to select
"REC INPUT", then press the SET/DEMO key.
4
Turn the VOLUME/MULTI CONTROL knob to select
"DIGITAL" or "ANALOG", then press the SET/
DEMO key.
Adjust the recording level
The level for recording the digital input signal from an auxiliary source component such as a satellite
tuner or MD recorder can be adjusted.
(The recording level of the audio selected in "Selecting the recording input signal (REC INPUT)" can be
adjusted.)
1
Press the MODE key
2
Turn the VOLUME/MULTI CONTROL knob to
select "REC LEVEL", then press the SET/
DEMO key.
3
Adjust the recording level (- oo ~ +12) by rotat-
ing the VOLUME/MULTI CONTROL knob.
4
Press the SET/DEMO key to set the selection.
(REC INPUT)
(REC LEVEL)
R
E C
I N P U T
REC INPUTindicator
DIGITAL
D I G I T A L
R
E C
L E V E L
Adjust so that these segments
light at times.
Recording on MD
Input level
+ 1
Level value