Kenwood HM-DV6MD Instruction Manual page 101

Table of Contents

Advertisement

Symptom
The TV screen does not show any message
when a button is pressed.
The messages in the menus are not displayed in
the selected language.
An inhibition icon is displayed and no operation
is accepted.
Symptoms related to MD standard
Symptom
"DISC FULL" is displayed while the disc still has
a remaining recordable time.
The possible recording time does not increase
even when a short track is erased.
Tracks can not be connected.
The total of the recorded time and remaining
recording time does not match the total record-
ing time of the MD (60, 74 or 80 minutes).
When search is performed in a track which has
been compiled by editing, the sound is some-
times interrupted.
The track numbers are not assigned correctly.
"READING" is displayed for an abnormally long
time.
The time display becomes inaccurate with a
monaurally recorded disc.
Input of 1792 title characters is not possible.
*1 When the recording mode is STEREO (24 sec. when it is LP2 or MONO, 48 sec. when it is LP4).
*2 STEREO, LP2, LP4 and MONO modes.
*3 When the recording mode is STEREO (4 sec. when it is LP2 or MONO, 8 sec. when it is LP4).
¶ If "On Screen Message" is set to "Off", switch it "On".
¶ If the played DVD does not contain the recording of the default
language set by the user, the priority language specified for the
disc will be selected.
¶ The operations of certain DVDs and VCDs are restricted by the
intention of the software producers. Such discs should be oper-
ated in accordance with the software. Operations may also be
restricted depending on the player status.
÷ More than 255 tracks (track No. 256 or more) cannot be re-
corded. (There may be also cases in which recording is impos-
sible while the track number is less than 256.)
In such a case, the REMAIN time display shows "0:00".
÷ When the remaining time of the entire disc is less than 12 sec,
the remaining time indication on the display becomes "0:00".
When the total time of the deleted tracks exceeds 12 sec, the
display changes to the recordable time.*1
÷ When a short track is deleted on a repeatedly edited disc, the
remaining time may not increase.
÷ Connection of the track resulting from edit processing may not
be possible.
÷ It is not permitted to combine two tracks which are recorded in
different recording modes.*2
÷ As the MD is recorded based on minimum recording units of 2
seconds, the consumed disc space may not coincide with the
displayed time information.*3
÷ This derives from the restriction in the MD system standard and
not a malfunction.
÷ Depending on the contents of the recorded source (CD etc.), the
track numbers may not be assigned correctly.
÷ When a new recordable MD (with nothing recorded) is inserted,
"READING" is displayed longer than usual.
÷ Monaural recording and stereo recording are executed according
to different formats. This is not a malfunction.
÷ The title recording area is used in units of 7 characters, so that
input of 1792 characters may not be possible.
In case of difficulty
Remedy
Cause
101
i

Advertisement

Table of Contents
loading

Table of Contents