Playback Of Disc; Basic Play - Kenwood DVR-8100 Instruction Manual

Playback of disc

Basic play

1
Load a disc
MAIN UNIT
2
Select the DVD/CD
MAIN UNIT
INPUT
÷ When a disc is set on the tray and DVD/CD is selected,
playback of the disc will be started automatically.
3
Start playback
MAIN UNIT
£
8
/
÷ Each press 6 key on the
main unit pauses and plays
the disc alternately.
To stop playback
MAIN UNIT
7
0
REMOTE
DVD/CD
REMOTE
3
÷ Press 8 key on the remote
control unit to pause the disc.
PRESET
8
REMOTE
AUTO/MONO
7
DVD/CD
3
8
1 Open the tray.
2 Place a disc.
3 Close the tray.
6 6
÷ When the 6 6 6 (play/pause) key on the main unit is
pressed instead of the 0 0 0 0 0 (open/close) key in step 3, the
tray will close and playback will start automatically.
When a Disc Menu appears on the screen
In case of interactive DVDs, a Disc Menu appears on the screen.
Then press ENTER to select specific menu you want to play by using
Cursor keys.
When a menu screen is recorded on the disc, the
menu screen will be displayed when the TOP MENU
key is pressed. At the menu screen, the menu can be
selected by pressing the Cursor keys.
÷ When the 6 key on the main unit is pressed while an
input other than disc is selected, the unit will be switched
to DVD/CD and playback will start.
DVD AUDIO
DVD VIDEO
AUTO DETECT
TITLE
ACTIVE EQ
CHAP
SOUND EQ TRACK
CHAPTER No. (DVD), TITLE No. (DVD), TRACK No. (CD),
Time display, etc.
RESUME playback
When the 7 key has been pressed once during
playback to stop the playback, and then playback is
started again, play will start from the point where
the playback had been stopped. This is called the
RESUME function. When the 7 key is pressed again
during stop, the RESUME function is cancelled.
RESUME is cancelled when 5 minutes have passed in
RESUME status.
DVR-8100 (EN)
6
7
0
INPUT
Label side
AUTO ST.
TUNED CLIP
L C R
SW LFE
LS S RS
27