Kenwood DVF-R9050 User Manual page 57

6.
Each press of the button turns on and off the
ENTER
corresponding speaker icon in the graphic room at
the lower half of screen alternately. When the selected
kind of speaker is to be used, the corresponding
speaker icon should be displayed.
Speaker Setting (Quick)
Test Exit
L C R
LS SW RS
C
L R
SW
SL
7.
To set the use of other kinds of speakers, repeat step
5 for each of them.
8.
After completing the setting, place the cursor on "Exit"
and press .
ENTER
"Speaker Setting (Custom)"
Setting items
Front speakers (L, R)
Size: "Large"
Level: "0 dB"
Center speaker (C)
Size: "Large"
Use of center speaker: Used
Level: "0 dB"
Delay time: "0 ms"
Surround speakers (SL, SR)
Size: "Large"
Use of surround speakers: Used
Level: "0 dB"
Delay time: "0 ms"
Subwoofer
Use of subwoofer: Used
Level: "0 dB"
Operation procedure
1.
Set the mode switch of the joystick remote to the
Purple position.
2.
While the player is in stop mode, press
the joystick up or down to display the "SOUND"
menu of "SET UP MENU".
SR 3.
Press to open the setup screen.
ENTER
4.
In the setup menu, select "Speaker Setting
(Custom)" by tilting the joystick up or down and
press .
ENTER
5.
Set each speaker by tilting the joystick up/down and
to the left/right. Select the item to be set and press
.
ENTER
Speaker Setting (Custom)
0 dB
L
SL
0 dB
1
and tilt
SET UP
Test Exit
L C R
LS SW RS
0 dB
C
0 dB
0 ms
R
0 dB
SW
SR
0 ms 0 dB
Chapter 6: Various Setups
To set the front speakers: Select and adjust "L" or
"R". The other, non-selected front speaker will
automatically set to the same setting as the selected
speaker.
To set the center speaker: Select "C".
To set the surround speakers: Select and adjust
"SL" and "SR" separately.
To set the subwoofer: Select "SW".
To output the test tone: Select "Test"
To exit from the screen: Select "Exit"
6.
Select the desired speaker setting by tilting the joy-
stick up/down and to the left/right.
If " " is selected, the screen in step 5 appears again
without entering the performed changes in the
speaker setting in memory.
[Front Speakers setting]
Speaker Setting (Custom)
L Exit
Size Large Normal
Level -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0
dB
0 dB
C
0 dB
0 ms
L R
0 dB
SW
SL
0 dB 0 ms 0 dB
Size: Select "Normal" when the connected speaker
is incapable of reproducing audio below 100 Hz.
Select "Large" when the connected speaker can
reproduce audio below 100 Hz.
Level: Set the volume level.(0 ~ -12 dB)
After completing the speaker setting, select "Exit"
to enter the setting and return to the screen in step
5.
0 dB
SR
57