Kenwood DVF-R9050 User Manual page 48

Multiple dvd vcd cd player
Hide thumbs Also See for DVF-R9050:
Table of Contents

Advertisement

"Temporary Unlocked": Select to disable
temporarily the viewing restriction which has been
set previously. (This item cannot be selected unless
a password has been set previously.)
Operation procedure
1.
Set the mode switch of the joystick remote to the
Purple position.
2.
While the player is in stop mode, press
display the "MAIN" menu of "SET UP MENU".
3.
Press
to open the setup screen.
ENTER
4.
In the setup menu, select "Rating" by tilting the
joystick up or down and press
Rating
7
7 8 No Limit
7 7
7 6
7 5
7 4
7 3
7 2
7 1
7 0 Lock All
7 Change Password
7 Temporary Unlocked
5.
Select a viewing level by tilting the joystick up or
down, then press
to display the password input
ENTER
screen.
¶ See "Input of Password".
48
Input of Password
When no password has been set previously:
1 In step 5, the password input screen as shown be-
low appears. Now, set the mode switch of the joy-
stick remote to the Orange position, compose the
password using the numeric buttons and press the
ENTER button.
1
to
Rating
SET UP
7 Cange Level
Input a 4-digit password.
Then press ENTER.
.
ENTER
¶ When "
button is pressed, the display returns to the setting
screen. (This effect can also be achieved by pressing
the RETURN button or tilting the joystick toward
the left.)
2 The password input screen changes to the confir-
mation screen, and the input password is shown
on the TV screen.
Rating
The player is locked.
Please remember the password.
Press ENTER to continue.
7
----
" in the screen is selected and the ENTER
0 2 1 4
Chapter 6: Various Setups
3 Note the password in a memo and retain it in a
safe place before pressing the ENTER button. The
password is required when setting the viewing re-
striction.
When a password has already been set:
In step 5, the password input screen as shown be-
low appears. Now set the mode switch of the joy-
stick remote to the Orange position, input the pass-
word using the numeric buttons and press the EN-
TER button.
Rating
7
7 Cange Level
Input a 4-digit password.
Then press ENTER.
----
¶ When "
" in the screen is selected and the ENTER
button is pressed, the display returns to the setting
screen. (This effect can also be achieved by pressing
the RETURN button or tilting the joystick toward
the left.)
If you select "Change Password", the screen for in-
put of the new password will open. Input the new
password using the numeric buttons and press the
ENTER button. When the password confirmation
screen appears, note the password in a memo and
retain it in a safe place then pressing the ENTER but-
ton.

Advertisement

Table of Contents
loading

Table of Contents