Control Buttons Used in Setups
SET UP button: Press to display the "SET UP MENU".
(Set the mode switch to the Purple position before
pressing this button.)
Joystick: Tilt the joystick in the 4 directions of up, down,
left and right to move the cursor to the desired point.
ENTER button: After moving the cursor to the desired
point, press the ENTER button to enter the point and
display the next setup screen.
RETURN button: Press to return to the previous setup
Numeric buttons, C button: Use these buttons to in-
put a figure using numeric buttons or to clear an in-
put with the C button. (Set the mode switch to Or-
ange position before pressing any of these buttons.)
SET UP button
Basic Operations in Setup Screen
The "SET UP MENU" includes the "MAIN", "SOUND"
and "VISUAL" menus. When a setup screen is displayed,
select the desired item according to the purpose.
If the power is turned off while the setup screen remains
displayed after setting changes, the changes will be
invalid. Be sure to close the setup screen before turning
Set the mode switch of the joystick remote to the
to open the "SET UP MENU" in which
"MAIN" is displayed.
SET UP MENU
Tilt the joystick up or down to switch the displayed
menu name to "SOUND" or "VISUAL".
¶ When you press the RETURN button or tilt the
joystick in the direction of arrow "EXIT" while the
"SET UP MENU" screen is displayed, the setup
mode can be canceled.
to open the setup screen.
¶ While a setup screen is displayed, tilting the joystick
toward "EXIT" allows the setup mode to be
canceled and tilting it toward "MENU" returns to
the "SET UP MENU".
For actual setup operations, see page 47 and after.
Chapter 6: Various Setups
Select the desired item by tilting the joystick in the
required direction, then press
to open the setup
Select a setting by tilting the joystick in the required
direction and press
to enter the change in
¶ Press the RETURN button or tilt the joystick to
the left to return to the setup screen.