Download  Print this page

Clearing The Program; Stopping Program Playback; Checking The Program; Disc Random Playback - KENWOOD DVF-R9050 User Manual

Multiple dvd vcd cd player.
Hide thumbs

Advertisement

.
7
Select
Play
in the screen using the joystick, then press
to start program playback.
ENTER
¶ When the mode switch of the joystick remote is
set to the Blue position and ¢ is pressed, the
current track is skipped and the next track in the
program will be played.
¶ Even when a disc is changed during programming,
the program playback plays the disc and track
numbers as registered with the previous disc. In
this case, the programming should be restarted
from the beginning.

Clearing the program

1.
Perform operations in steps 1 and 2 of the procedure in
"Registering and playing the program".
2.
Move the cursor to
Last Clear
screen, then press
.
ENTER
¶ Every time "Last Clear" is selected, the last track
in the program list is cleared. (The program can
also be cleared by pressing the C button.)
¶ When "All Clear" is selected, all tracks in the entire
program list are cleared.

Stopping program playback

Perform operations in steps 1 and 2 of the procedure
in "Registering and playing the program", then
TOP MENU
press
repeatedly until the player enters normal
/FOLDER S.
SQ.MODE
P.MODE
play mode (track mode).
¶ The "PGM" indicator turns off
40

Checking the program

Set the mode switch of the joystick remote to the
Purple position and press
playback.
¶ The program list is displayed on the TV screen.
When a program number is selected by tilting the
joystick up or down and the ENTER button is
pressed, program playback starts from the selected
program number. The contents of the program
numbers are also shown on the player display. (A
program number can also be selected by pressing
the CHECK button to move the cursor in the
program list.)
¶ When 17 or more tracks are programmed, the
program list is displayed in more than one page.
In this case, when the cursor is located on the
bottom edge, tilting the joystick downward makes
or
in the
All Clear
it possible to advance to the next page. (When the
cursor is located on the top edge, tilting the cursor
upward makes it possible to return to the previous
page.)

Disc Random Playback

Tracks in a desired disc can be played back in a random
¡
order. (Disc random playback is not available with DVD
during program
VIDEO, MP3 disc.)
C
CHECK
1.
Set the mode switch of the joystick remote to the
Orange position.
2.
While the player is in stop mode, press
repeatedly until the player enters the disc random
mode.
¶ When the player enters the disc random mode, the
screen as shown in the figure appears and the
"RANDOM" indicator in the display lights to
indicate that the player is in the disc random mode.
3.
Select the disc by tilting the joystick to the left or right,
then press
¶ Disc random playback can also be started by
pressing the 3 PLAY button.
Chapter 5: Applied Operations
DISC RANDOM MODE
DISC NO.
1
2
3
4
5
Press P.MODE to ALL RANDOM MODE
to start disc random playback.
ENTER
TOP MENU
/FOLDER S.
SQ.MODE
P.MODE

Advertisement

Table of Contents

   Also See for KENWOOD DVF-R9050

   Related Manuals for KENWOOD DVF-R9050

Comments to this Manuals

Symbols: 0
Latest comments: