Crossover Network Setup; Speaker Setup Memory - Kenwood XXV-05V Instruction Manual

Crossover Network Setup

You can manually set a crossover frequency of
speakers.
X'Over
LPF
Frequency y
1
Slope
2 18dB/Oct
1 Sets a crossover frequency.
2 Sets a crossover slope.
3 Returns to the Speaker Set Up screen.
4 Sets the phase of subwoofer output (it is
displayed when the subwoofer crossover
frequency is set).
The phase is reversed 180 degrees when set to
"Reverse".
• When you select a speaker type from the
Speaker Setup screen, the crossover
frequency setup is erased.
• During crossover setup, the speaker type is set
to "USER" on the Speaker Set Up screen.
(P51 w )
100Hz 1kHz
Phase
4
Normal
1
2
3
Return

Speaker Setup Memory

You can store all of speaker and crossover
setup in memory simultaneously.
To store your setup in memory
(P51 q )
Preset
Continue to touch more than 2 seconds.
To call your setup from memory
(P51 q )
Preset
English 55