Opening/Closing The Monitor And Power Switch - Kenwood XXV-05V Instruction Manual

Opening/Closing the Monitor and Power Switch

Open the monitor
Close the monitor
Turn the power
switch on
Hold down the [SRC] key more than
one second to turn it off.
• Do not touch the moving components when you are opening or closing the monitor. If done, you will get hurt.
• Do not try to open or close the monitor by hand.
• You can automatically open or close the monitor when you turn on or off the ignition key (see page 48).
• If the monitor movement is stopped by the shift lever or another obstacle when the monitor is opened, this movement is
canceled by the safety function. If an obstacle is pinched by the monitor when closed, the monitor movement is also
canceled by the safety function. If it has occurred, remove the obstacle and press the [OPEN/CLOSE] key again.
8 English
[OPEN/CLOSE] key
[SRC] key