Their setting values are different depending on the setting of the
speaker setting mode.
Audio Control Setting
Adjust various parameters of sound quality.
1
Press the AUD button for at least one second to enter the
control mode.
2
Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Pressing the FM button advances the display, and pressing the
AM button reverses it.
Volume Offset
Bass
Fader
Middle
Treble
Balance
NOTE
Source tone memory
Each source (tape, CD, MD, FM, AM and disc changer) has its
own memory in which to store the bass, middle, and treble tone
settings.
The settings made for a particular source are recalled
automatically whenever you use that source (for example, FM
mode uses the tone settings made for FM, AM for AM, etc.).
3
Adjust each mode
Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
Adjustment
mode
4 button
(Display)
Bass decreased.
Bass ("Bass")
Middle decreased.
Middle("Middle")
Treble("Treble")
Treble decreased.
Left channel emphasized.
Balance("Balance")
Rear channel increased.
Fader ("Fader")
The sound level of
Volume Offset
("V Offset")
each source decreased.
4
Press the AUD button to end the control mode.
NOTE
Determining the parameters in the audio control setting would
clear all the adjustments made in the System Q and they are
replaced with the values in the audio control setting.
Speaker Setting
This function allows you to adjust the setting that is recalled
with the System Q, according to types of speakers.
1
Press the SRC button repeatedly to select the standby mode.
"ALL OFF" is displayed when the standby mode is selected.
2
Press the Q button to enter the speaker setting mode.
Press either the 4 or ¢ button to select the type of
3
speaker. The setting switches as follows.
Off ("SP OFF") / For 6/6x9 in. speaker ("SP 6*9/6inch") /
For 5/4 in. speaker ("SP 5/4inch") /
For the OEM speaker ("SP O.E.M")
4
Press the Q button to end the speaker setting mode.
NOTE
Speaker setting function allows for tuning of bass, middle and
treble
— 7 —
Operation of Audio control button
¢ button
Bass increased.
Middle increased.
Treble increased.
Right channel emphasized.
Front channel increased.
The sound level of
each source increased.