Tuning; Station Preset Memory; Switching Display For Tuner - Kenwood KRC-689 Instruction Manual

Tuner features
Function of the KRC-781R

Tuning

1
Press the SRC (source) button repeatedly to select the tuner
mode. "TUNER" is displayed when the tuner mode has been
selected.
2
Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between the FM1, FM2 and FM3.
Press the AM button to select the MW and LW bands.
3
• Auto Seek Tuning
Press the ¢ button to seek higher frequencies.
Press the 4 button to seek lower frequencies.
• Preset station seek tuning
Press the ¢ button to move to the next preset station (i.e.,
the one with the next highest number), and the 4 button to
move to the last preset station (i.e., the one with the next
lowest number).
NOTE
If the frequencies stored at the preset numbers receive
stations which were not originally memorized when traveling
long distances, the preset number is not displayed. In such
cases, pressing the 4/¢ button to use preset station
seek will receive channel 1.
• Manual Tuning
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
NOTE
• The ST indicator lights up when stereo broadcasts are being
received.
• Please see the menu settings about selecting tuning mode.
(page 30)

Station Preset Memory

Store the frequency of a station. You can then recall that
station with a single touch of a button.
1
Select the band/station that you want to have stored.
2
Press the button (#1-6) that you want to use for the station, for
at least two seconds.
The button number blinks once in the display to indicate that
the data has been stored.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
NOTE
You can store six stations in each of the FM1, FM2, FM3, and
AM (MW and LW) bands.

Switching Display for Tuner

You can change the display used when listening to the radio.
Switching the Display:
Each time you press the DISP button, the display changes as
follows:
Program Service name (only during RDS station reception)/
Station frequency
Radio text (only during RDS station reception)
Displaying Frequencies during program service name display:
Press the DISP button for at least one second.
The frequency for the RDS station will be displayed for five
seconds instead of the station name.
NOTE
If the RDS station currently tuned to is transmitting no text while
the Radio Text Display mode is turned on, "NO TEXT" will appear
in the display. While awaiting reception, "Waiting" will be
displayed.
2WARNING
To prevent accidents, drivers should not look at the display while
on the road.
— 10 —