Radio Text Scroll - Kenwood KRC-689 Instruction Manual

2
Adjust the volume to the desired level.
3
Press the VOL ADJ button for at least two seconds.
The volume level blinks once in the display to indicate that the
data has been stored.
Future traffic information/news broadcasts are heard at the
preset level.
NOTE
• The volume cannot be lowered by this function during tuner
reception. The volume is only set when it is louder than the
listening volume of the tuner.
• You can arrange only to listen to traffic information or news
bulletins with at preset volume with the volume set at
minimum.

Radio Text Scroll

This function permits the text to be scrolled and the entire text
to be displayed. The scrolling method differs depending on the
setting of scrolling in the menu.
To scroll manually:
1
Press the DISP button to display the Radio Text.
2
Pressing the DISP button for at least one second results in one
scrolling display of the text.
To scroll automatically:
1
Press the DISP button to display the Radio Text.
The text will be displayed in one scrolling display.
2
Pressing the DISP button for at least one second results in one
scrolling display of the text.
NOTE
Please see the menu settings (page 31) about switching between
manual scrolling and automatic scrolling.
— 13 —