Ot Her F Eat Ures Audio Control Setting; Table Of Audio Control Setting - Kenwood KRC-PS959R Instruction Manual

Other features
(See page 7)
A udio Cont rol Set t ing
Adjust various parameters of sound quality.
1
Press the AUD button to enter the control mode.
2
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode w ill
change as follow s:
Pressing the FM button advances the display, and pressing the
AM button reverses it.
Bass
Treble
Balance
Fader
N OTE
Source tone memory
Each source (tape, FM , AM , and disc changer) has its ow n
memory in w hich to store the bass and treble tone settings.
The settings made for a particular source are then recalled
automatically w henever you use that source (e.g., FM mode uses
the tone settings made for FM , AM for AM , etc.).
3
Press the 4 / ¢ button.
Look at the table to adjust the mode being displayed.
4
Press the AUD button to end the control mode.
N OTE
Setting the high-pass filter
You can separately set the high-pass filter for front and rear
output, including preouts. The high-pass filter w orks except
during non- fading preout w hen sw itching to non-fading.
The factory default settings for front output and rear output are
"through".
Downloaded from: http://www.usersmanualguide.com/
High-pass filter (rear)
High-pass filter (front)
N-F Level (only w hen being sw itched)
(KRC-PS959R,859R/C/W only)
(KRC-PS959R,859R/C/W only)
Table of A udio Cont rol Set t ing
Adjustment
mode
4 button
(Display)
Bass
Bass decreased.
(" BAS" )
Treble
Treble decreased.
(" TRE" )
Balance Left channel
(" BAL" ) emphasized.
Fader Rear channel
(" FAD" ) increased.
Non-Fading
The front and rear
Preout Level
sound is emphasized.
(" NF" )
You can select the frequency to be cut, as
High-pass
follow s:
filter for front
THROU (through)
output
100Hz
(" HPF F" )
You can select the frequency to be cut, as
High-pass
filter for rear follow s:
THROU (through)
output
100Hz
(" HPF R" )
— 29 —
Operation of Audio control button
¢ button
Bass increased.
Treble increased.
Right channel
emphasized.
Front channel
increased.
The non-fading sound is
emphasized.
40Hz 60Hz
120Hz 150Hz 180Hz
40Hz 60Hz
120Hz 150Hz 180Hz
KRC-PS959R,859R/C/W only
80Hz
220Hz
80Hz
220Hz