Remote Controller; Main Elements And Features - Kenwood KDV-5241U Instruction Manual

Basic operations —
Installing the lithium coin battery (CR2025)
If the range of effectiveness of the remote controller
decreases, replace the battery.
For USA-California Only
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material—special
handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
The unit is equipped with the steering wheel
remote control function.
• See the Installation/Connection Manual (separate
volume) for connection.
Warning:
To prevent accidents and damage
• Do not install any battery other than CR2025 or
its equivalent.
• Store the battery in a place where children
cannot reach.
• Do not recharge, short, disassemble, or heat the
battery or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or similar
tools.
• Wrap the battery with tape and insulate when
throwing away or saving it.
10 | KDV-5241U

Remote controller

Main elements and features

1
• Turns on the power.
• Attenuates the sound if the power is on.
• Turns off the power if pressed and held (while
2
Selects the source.
3
Selects the FM/AM, and satellite radio bands.
4
Changes the aspect ratio of the playback pictures.
5
Not used for this unit.
6
Adjusts the volume level.
• Not used as 2nd VOL button for this unit.
7
* 1 • DVD/DivX: Shows the disc menu.
• VCD: Resumes PBC playback (☞ page 22).
8
* 1 Not used as SETUP button for this unit.
9
SHIFT button
the power is on).