Connecting Wires To Terminals - Kenwood 86120-YZA59 Owner's Manual

Connecting Wires to Terminals

To connect the Disc changer, consult your
Disc changer manual.
To Kenwood disc
changer/ External
optional accessory
Fuse (10A)
Wiring harness
(Accessory1)
Power control wire (Blue/White)
Motor antenna control wire (Blue)
TEL mute wire (Brown)
Dimmer control wire (Orange / White)
External amplifier control wire (Pink / Black)
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
FM/AM
antenna input
Front left output (White)
Front right output (Red)
Rear left output (White)/ Sub Woofer left output (White)
Rear right output (Red)/ Sub Woofer right output (Red)
If no connections are made, do not let the wire come out from the tab.
ANT. CONT
EXT.CONT.
White/Black
White
FRONT L
Gray/Black
Gray
FRONT R
Green/Black
Green
REAR L
Purple/Black
Purple
REAR R
AUX left input (White)
AUX right input (Red)
When using the optional power amplifier, connect
to its power control terminal.
P.CONT
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna, or
to the power terminal for the booster amplifier of the
film-type antenna.
Connect to the terminal that is grounded when either
the telephone rings or during conversation.
MUTE
To connect the Kenwood navigation
system, consult your navigation manual.
To car light control switch.
ILLUMI
To "EXT.AMP.CONT. " terminal of the amplifier having the
external amp control function.
To front left
speaker
To front right
speaker
To rear left
speaker
To rear right
speaker
ACC
Car fuse box
Ignition key
switch
Car fuse box
(Main fuse)
–
+
Battery
|
English
27