Ac Adaptor; Connecting A Printer - VTech MindBooster Handheld User Manual

• Remove batteries from equipment when the unit will not be in use for a long time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended are to be used.

AC ADAPTOR

Use the VTech ®
9V 300mA
CONNECTING THE ADAPTOR
1. Make sure the unit is OFF.
2. Locate the adaptor jack on the back of the Docking Station.
3. Insert the adaptor plug into the unit's adaptor jack.
4. Plug the adaptor into a wall outlet.
5. Turn the unit ON.
NOTE: When toy is not in use for long periods of time, unplug the adaptor.
STANDARD FOR ADAPTORS
• The adaptor is not intended for use by children under 3 years old;
• Only use the recommended adaptor with the toy;
• The adaptor is not a toy;
• Never clean a plugged-in toy with liquid;
• Never use more than 1 adaptor;
• Do not leave plugged-in for extended periods of time.
NOTICE TO PARENT
Regularly examine the adaptor, checking for damage to the cord, plug, transformer
or other parts. Do not use the adaptor if there is any damage to it.

CONNECTING A PRINTER

• Make sure both your unit and the printer are off.
• Only the VTech
• Locate the printer port on the back of the unit and plug the printer cable into it .
• Turn the unit on, then turn the printer on.
adaptor or any standard adaptor complying with EN61558 DC
AC center-positive adaptor.
®
VT-41 is compatible with your unit.
3