Connect The Network Cable - Brother MFC-8480DN Quick Setup Manual

Wired Network
For Wired Network Interface Users
®
(Mac OS X 10.3.9 or greater)
17
Before you install
a
Make sure your machine is connected to the
power and your Macintosh
be logged on with Administrator rights.
IMPORTANT
Make sure a USB Flash memory device is not
inserted into the machine.
18
Connect the network
cable
a
Connect the network interface cable to the LAN
connector marked with a
connect it to a free port on your hub.
26
®
is ON. You must
symbol and then
Macintosh
19
Install MFL-Pro Suite
a
Put the supplied CD-ROM into your CD-ROM
drive.
b
Double-click Start Here OSX to install.
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
Note
Please see the Network User's Guide on the
CD-ROM if you want to install the PS driver.
(Brother's BR-Script Driver)
c
The Brother software will search for the Brother
device. During this time the following screen
will appear.
®