Brother MFC-8480DN Quick Setup Manual page 24

Wired Network
g
Choose Network Connection, and then click
Next.
Note
If you want to install the PS driver (Brother's
BR-Script Driver), choose Custom Install and
then follow the on-screen instructions. When the
Select Features screen appears, check
PS Printer Driver, and then continue following
the on-screen instructions.
h
®
For Windows
Edition/ Windows Vista
screen appears, choose Change the Firewall
port settings to enable network connection
and continue with the installation.
(Recommended) and click Next.
If you are not using the Windows
the User's Guide for your software for
information on how to add the following
network ports.
For network scanning, add UDP port 54925.
For network PC-Fax receiving, add UDP port
54926.
If you still have trouble with your network
connection, add UDP port 137.
i
If the machine is configured for your network,
choose the machine from the list, and then click
Next.
24
XP SP2/XP Professional x64
®
users, when this
®
Firewall, see
Note
• You can find your machine's IP address and
the node name by printing out the Network
Configuration List. See Print the Network
Configuration List on page 30.
• If your machine is not found over the network,
following screen will appear.
Confirm your network setting by following the
on-screen instructions.
• If the machine is not yet configured for use on
your network, the following screen appears.
Click OK and then Configure IP Address.
Enter an IP address for your machine that is
suitable for your network by following the
on-screen instructions.
j
If you do not want to monitor the machine
status and error notification from your
computer, uncheck Enable Status Monitor
and then click Next.
k
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
®
Windows