Load Paper In The Paper Tray - Brother MFC-8480DN Quick Setup Manual

3
Load paper in the paper
tray
a
Pull the paper tray completely out of the
machine.
b
While pressing the blue paper-guide release
lever a, slide the paper guides to fit the paper
size you are loading in the tray. Make sure that
the guides are firmly in the slots.
Note
For Legal or Folio size paper, press the release
button in the bottom of the paper tray and then
a
pull out the back of the paper tray.
(Legal or Folio size paper are not available in
some regions.)
4
c
Fan the stack of paper well to avoid paper jams
and misfeeds.
d
Put paper in the tray, and make sure that the
paper is below the maximum paper mark a.
The side to be printed on must be face down.
IMPORTANT
Make sure the paper guides touch the sides of
the paper so it will feed properly.
e
Put the paper tray firmly back in the machine.
Make sure that it is completely inserted into the
machine.
1 f
Unfold the support flap
from sliding off the face-down output tray.
1 1
to prevent paper
a
1
1