Physical Interface Expansion
To set up a daisy chained/cascaded installation under Physical Interface
Expansion, refer to the diagram below, and do the following:
1. Follow the cabling up procedures given in the Daisy Chaining sections.
2. Power up the daisy chained KM0432 Stations according to the sequence
given in the Daisy Chaining section (p. 18).
3. After all the daisy chained KM0432 Stations are up, power up each chain of
KH0116s according to the instructions provided in the KH0116 User
Manual.
4. After all the KH0116s are up, power on the computers.
KA9120
KH0116
KH0116
26
KA9120
KH0116
KH0116
2003-12-15