Speed Dial Locations; To Assign Or Reassign A Directory Entry To A Speed Dial Location; To Clear A Speed Dial Location - AT&T TL32100 User Manual

Directory

Speed dial locations

To assign or reassign a directory entry to a speed dial location

1. Press MENU/
2. Press or
DIR
/SELECT.
MENU
3. Press or
DIR
/SELECT.
MENU
4. To assign a speed dial location, press
scroll to an empty speed dial location.
-OR-
To reassign a speed dial location, press
scroll to the desired speed dial location.
5. Press /SELECT. The screen shows Copy from
MENU
Directory and then the directory.
6. Press or
DIR
find the desired entry.
-OR-
Use the alphabetical search to find the desired entry.
Refer to steps 2 and 3 in To search by name on page 39.
7. Press /SELECT to confirm. The name (up to 12
MENU
characters) of the desired directory entry appears in
the selected speed dial location.
NOTES:
• If the directory is empty, when you press
Directory empty.
• If the speed dial location you selected is occupied, the new directory entry you selected
replaces the old one. Take caution not to replace entries you do not wish to delete from the
speed dial locations.

To clear a speed dial location

1. Follow steps 1 through 3 in To assign or reassign a
directory entry to a speed dial location on this page
to enter the speed dial list.
2. Press or
DIR
/REMOVE to clear the selected speed dial
3. Press
MUTE
location, <empty> displays.
NOTE: Clearing the speed dial locations does not affect the entries
in the directory.
in idle mode.
SELECT
to scroll to >Directory. Press
CID
to scroll to >Speed dial. Press
CID
to browse through the directory and
CID
to scroll to a speed dial location.
CID
or
DIR CID
or
DIR
/SELECT in step 5, the screen shows
MENU
42
Add contact
>Speed dial
to
>0: <empty>
1: Robert Brown
to
CID
Charlie Johnson
888-883-2445
>0: Charlie John
1: Robert Brown
>0: Charlie John
1: Robert Brown
>0: <empty>
1: Robert Brown