Call Transfer Using Intercom - AT&T TL32100 User Manual

Telephone operation

Call transfer using intercom

If you have more than one handset (see Adding and registering a handset
on page 60), you can use the intercom feature to transfer an outside call to
another system handset.
During a call, press MENU/
1.
2. Press or
DIR
/SELECT.
MENU
• If you have two handsets, the outside call is put on
hold and your handset screen shows
Calling other handset. The other handset rings and
its screen shows Other handset is calling.
• If you have more than two handsets, your screen
shows Intercom to: Use the dial pad keys to enter a
handset number. The outside call is put on hold and
your handset screen shows Calling HANDSET X. The
other handset rings and its screen shows
HANDSET X is calling.
3. To answer the intercom call on the other handset, press
any dial pad key (0-9, , or #),
SPEAKER. The outside call is still on hold and both
handsets now show Intercom. You can now have a
private conversation between the system handsets.
NOTES:
• To cancel the transfer and return to the external call before the
intercom call is answered, press
PHONE/
FLASH
• If the other handset is not answered within 100 seconds, is in use, on a call or is
out of range, the calling handset shows Unable to call. Try again on its screen and
automatically returns to the external call.
SELECT
to scroll to >Intercom, then press
CID
on your handset.
on your handset.
PHONE/
FLASH
OFF/ or
CLEAR
34
Phone
10:30
PM
Intercom to:
Calling
HANDSET X
or
Intercom
0:00:20
10/20