Telephone settings
Handset settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
1.
Press MENU/
2.
Press
or
DIR
/SELECT.
MENU
3.
Press
or
DIR
/SELECT.
MENU
4.
Press
or
DIR
5.
Press
/SELECT to save the setting.
MENU
NOTE: If you have pulse (rotary) dialing service only, refer to Temporary tone dialing on
page 28 to temporarily switch from pulse to touch-tone dialing during a call.
Website
You can use this feature to view the AT&T website address on the handset.
Press MENU/
1.
2.
Press
or
DIR
screen shows
3.
Press
/SELECT to return to the previous menu.
MENU
in idle mode.
SELECT
to scroll to >Settings, then press
CID
to scroll to >Dial mode, then press
CID
to select Tone or Pulse.
CID
in idle mode.
SELECT
to scroll to >Website, then press
CID
www.telephones.att.com
.
16
Dial mode
>Tone
/SELECT. The
MENU
www.telephones
.att.com