Intercom Calls - AT&T E2803B User Manual

INTERCOM.TO:
NOTES:
1....Pressing.INT.while.on.an.exter-
nal.call.will.initiate.call.transfer.
(see.page.17).
2....While.a.handset.is.in.the.directory.
or.call.log,.or.out.of.range,.the.
intercom.feature.cannot.be.used.
3.. If.the.destination.handset.does.
not.answer.the.intercom.call.
within.100.seconds,.the.originat-
ing.handset.will.show.UNABLE
TO CALL.
Telephone operation

Intercom calls

You can use the intercom feature to have conver-
sations between the handsets.
1. Press the button on a handset.
INT
2. The display will read INTERCOM TO:
3. Enter the destination handset number. The dis-
play will read CALLING HS #X.
4. The destination handset will ring and its screen
will display INTERCOM CALL.
5. Press ,
INT PHONE/
pad key (0-9, *, or #) on the destination hand-
set to answer the call.
To end the intercom call:
• Press
OFF/
CLEAR
-OR -
• Place either handset in the charger or tel-
ephone base.
Handling incoming calls
The phone will beep if there is an incoming exter-
nal call during an intercom conversation. You can
either:
• Press
PHONE/
FLASH
and answer the incoming call.
-OR -
• Press or
INT OFF/
com connection without answering the incom-
ing call. The incoming call will continue to ring.
15
,
SPEAKER
FLASH
or on either handset.
INT
to end the intercom call
to disconnect the inter-
CLEAR
or any dial