Installation - AT&T 2455 User Manual

2455_book_1ATT 8/29/00

INSTALLATION

1 Connect the power cord to the base and an electrical
outlet not controlled by a wall switch.
2 Connect
the
telephone
line cord.
Use only the power cord supplied with this product.
If you need a replacement, call 1 800 222-3111.
3 Install the handset battery.
b) Place the battery pack in
4
12:05 AM Page 4
Modular
telephone
jack
a) Remove
battery
compartment
cover by
pressing on
indentation
and sliding
downward.
the handset. Align the
metal contacts on the
battery with the contacts
in the battery
compartment.
Standard
electrical outlet
c) Replace cover
by sliding it on
its track up
over battery
case until it
snaps firmly
into place.