Setting Up Overview - 3Com 4200G PWR Getting Started Manual

34 C 3: S
HAPTER ETTING
Setting Up
Overview
U M
P FOR ANAGEMENT
Figure 10 SNMP Management over the Network
SNMP Network Management
Workstation
Refer to "Setting Up SNMP Management V1 or V2" on page 50.
This section gives an overview of what you need to do to get your Switch
set up and ready for management when it is in its default state. The
whole setup process is summarized in Figure 11. Detailed procedural
steps are contained in the sections that follow. In brief, you need to:
Configure IP information manually for your Switch or view the
■
automatically configured IP information
Prepare for your chosen method of management
■
Connect over Network
using SNMP
Switch