3Com 4200G PWR Getting Started Manual page 62

62 C 5: U
HAPTER PGRADING
S
OFTWARE
Table 11 Switch 4200G Filenames
Filename Prefix/Suffix
s3t / .app
s3u / .btm
s3v / .web
2 To download the Web user interface file, enter:
[4200G] tftp aaa.aaa.aaa.aaa get http.web
3 To download the default configuration file, enter:
[4200G] tftp aaa.aaa.aaa.aaa get 3ComOScfg.def
4 To download the bootrom file, enter:
[4200G] tftp aaa.aaa.aaa.aaa get s3u01_00.btm
The bootrom firmware may not require upgrading for every software
upgrade, therefore there may not be a new bootrom (.btm) file to
download.
Command Line Interface Switch Setup
1 To set the Switch to boot from the new software you have downloaded,
enter the following:
[4200G] boot boot-loader
unit1>flash:/s3t03_01_00s56.app
2 To set the Switch to load the new bootrom firmware, enter:
[4200G] boot bootrom unit1>flash:/s3u01_00.btm
The following prompt is displayed:
This will update Bootrom on unit 1. Continue? [Y/N]
Type Y to update the bootrom.
3 To set the Switch to load the new web management file, enter:
[4200G] boot web-package s3v01_00.web main
4 You will now need to reboot the Switch. The Switch will upgrade the
bootrom firmware and boot from the specified software .app file.
Switch
Switch 4200G software
Switch 4200G bootrom software
Switch 4200G web management software