Switch 4200G - Rear View Detail; Power Socket; Gbps Interface Slots - 3Com 4200G PWR Getting Started Manual

Switch 4200G —
Rear View Detail
AC Power Input

Power Socket

10 Gbps Interface
Slots
Table 5 LED Behavior (continued)
LED Color
Duplex Green
Yellow
Yellow flashing
Off
1000BASE-X Port SFP Port LEDs
Speed Green
Yellow Flashing
Off
Duplex Green
Yellow
Yellow flashing
Off
Figure 4 Switch 4200G—rear view
The Switch automatically adjusts its power setting to any supply voltage
in the range 100–240 VAC.
The MOD 1 and MOD 2 interface slots accept the 10 Gbps SFP modules.
Switch 4200G — Rear View Detail
Indicates
Full duplex, blinking off for every packet received or
transmitted.
Half duplex, blinking off for every packet received or
transmitted.
The port has failed POST.
No link is present.
A high speed (1000 Mbps) link is present.
Port failed POST.
No link is present.
Full duplex packets are being transmitted/received on the
port.
Half duplex packets are being transmitted/received on the
port.
Port failed POST.
No link is present.
MOD 1
10Gbps Interface
Slot 1
19
MOD 2
10Gbps Interface
Slot 2