Before You Begin; Figure 1-1. Rack-To-Tower Kit Contents - Dell PowerEdge 4600 Manual

Rack-to-tower conversion guide

Hide thumbs Also See for PowerEdge 4600:

Table of Contents

F i g u r e 1 - 1 .

R a c k - t o -To w e r K i t C o n t e n t s

tower bezel

tower trim panel

Before You Begin

Before you begin removing your system from the rack and converting it to a tower version

system, carefully read "Safety Instructions."

You will reuse the following parts:

•

The fourteen 6-32 x 0.312-inch black flat-head T-10 Torx screws that you remove from

the rack version system's front panel

•

The bezel attaching bracket and the four 6-32 x 0.312-inch black flat-head T-10 Torx

screws

•

The control panel and one 6-32 x 0.25-inch hex-head Phillips screw that you remove

from the control panel

metal feet (4)

tower front panel

6-32 x 0.25-inch hex-

head Phillips screws (10)

6-32 x 0.312-inch black

flathead T-10 Torx screws (6)

Rac k - t o -To w e r C o n v e r s io n G u i d e

1-3

Table of Contents