6.
When Partition Manager is running, verify that the complex information looks correct and
that no error messages appear. For example, in the Action menu on the right side of the
screen, click Complex to expand the complex-level submenu. Click Show Complex Details
to display a complete listing of the complex configuration. Verify that this information is
correct, and that no error messages appear. Click OK to close the Complex Details window.
7.
In the same Complex menu, click Clear All LEDs. A dialog box should appear, stating that
the command ran successfully. If possible, verify that server LEDs are off by looking at the
server.
If these tests do not give the desired results, you can perform additional tests to help pinpoint
the problem. Consult the nPartition Administrator's Guide mentioned previously.
74
Installing and Configuring the Management Tools