Figure 2-16 EBSU Product Key screen
11. EBSU displays a warning that all partitions on the disk will be overwritten. Select Continue
and press Enter.
12. EBSU displays a warning that a temporary MSDATA partition will be created. Press Enter.
13. EBSU displays an informational pop-up that the installation will begin. Press Enter.
14. The installation begins and progresses through partition creation and firmware updates.
Insert the HP Integrity Offline Diagnostics CD when prompted, then press Enter.
NOTE:
Enter to bypass installation of the diagnostic utilities.
15. EBSU displays an informational screen. Write down the instructions in case you need them
later (for example, if the system cannot locate the Internal Bootable DVD drive), and press
Enter.
Figure 2-17 EBSU Informational screen
40
Installing the OS
At this point, if you cannot locate the Offline Diagnostics CD, select Skip and press