Efi-Based Setup Utility - HP Integrity rx7620 Installation Manual

Table B-1 EFI Shell Commands and Descriptions (continued)
Command
Memory Commands
Commands for listing and managing memory, EFI variables, and NVRAM details.
default
dmem
dmpstore
memmap
mm
pdt
Shell Navigation and Other Commands
Commands for basic EFI Shell navigation and customization.
alias
cls
exit
getmtc
help or ?
mode
set
xchar
Shell Script Commands / Programming Constructs
EFI shell script commands.
echo
else
endfor
for
goto
if
input
pause
stall

EFI-Based Setup Utility

The EFI-Based Setup Utility (EBSU) provides an easy-to-use interface to flash the firmware,
partition the hard disk, install diagnostic tools, configure storage controllers, and run other EFI
utilities. EBSU provides the following functions:
• Express Setup — Guides you through Windows installation and setup. Express Setup guides
you through the following setup tasks:
— Updating firmware
— Creating disk partitions
82 EFI Utilities
Description
Set default NVRAM values.
Dump memory or memory-mapped I/O.
Display EFI variables.
Display the memory map.
Display and modify MEM/IO/PCI.
View and clear nPartition or cell memory page de-allocation table (PDT).
Set and get alias settings.
Clear the standard output with an optional background color.
Exit EFI Shell environment.
Display current monotonic counter value.
Display help.
Display the mode of the console output device.
Set and get environment variable.
Turn on and off extended character features.
Echo message to stdout or toggle script echo.
Script-only: Use with IF THEN.
Script-only: Delimiter for FOR loop construct.
Script-only: Loop construct.
Script-only: Jump to label location in script.
Script-only: IF THEN construct.
Take user input and place in EFI variable.
Script-only: Prompt to quit or continue.
Stall the processor for some microseconds.