1. Install batteries
Your universal remote requires
batteries (not included).
To install the batteries:
Battery Precautions:
•
Do not mix old and new batteries.
•
Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
•
Always remove old, weak or worn-out
batteries promptly and recycle or dispose of
them in accordance with Local and National
Regulations.
Battery Saver
Your universal remote control saves battery power
by automatically turning off if any key is pressed
for more than 60 seconds. This saves your battery
life should your remote get stuck in a place where
the keys remain depressed, such as between sofa
cushions.
Tip: This remote is already programmed to
operate many Samsung-branded TVs and DVD
players, DIRECTV-branded satellite receivers,
and Sony-branded audio receivers. Just press
the corresponding key— DVD•VCR for a DVD
player, TV for a television, SAT•CBL•STREAM for
a satellite receiver, and AUDIO•AUX for an audio
receiver.
2
two
1.
Remove the battery
compartment cover.
2.
Insert the batteries,
matching the (+) and (–)
marks inside the battery
compartment.
3.
Push the battery cover back
into place.
AAA alkaline