RCA RCRPS04GR Quick Start Manual

RCRPS04GR

Quick Start Guide

Programming the Remote
Remove the battery compartment
1
cover, insert 2 AAA batteries (not
included), and replace the cover.
Press and hold the device key. Then
4
press the POWER key at the same
time. Wait until the POWER key
illuminates, then release both keys.
7 Test all of the following
keys that have a
function with this
component: POWER,
VOL+, CHAN+, 0, PLAY,
and STOP.
Programming Your Preset Channels
You can program up to 10 of your favorite channels on both
2 Manually turn on the device you
want to control.
Enter the numbers for your brand
5
from the Brand Code List.
CH+
VOLUME
Find the device's brand in the
3
Brand Code List. Circle it and keep
the list handy.
Note: If your brand
isn't in this list, see the
Owner's Manual for
other ways to program.
Point the remote directly at your
6
component and press GUIDE. If
your device turns off, go to the
next step. If not, repeat this one.
2s
1x 1x
8 If these keys work, press
0–
OFF
. . .
2s
NEXT STEP
To program the other
device keys, follow
these instructions
again.