Selecting The On-Screen Display Language; Selecting The Video Input System Mode (Video Mode Only) - Sharp XG-NV5XB Operation Manual

Selecting the On-screen Display Language

Projector
(GUI) On-screen Display

Selecting the Video Input System Mode (VIDEO mode only)

Projector
(GUI) On-screen Display
E-23
ON VOL
MUTE
OFF
BLACK
SCREEN LASER
TOOLS MENU
1, 5
2, 3
R-CLICK ENTER
4
INPUT IrCOM
FREEZE AUTO SYNC
ON VOL
MUTE
OFF
BLACK
SCREEN LASER
TOOLS MENU
1, 6
2, 3, 4
R-CLICK ENTER
5
INPUT IrCOM
FREEZE AUTO SYNC
English is the preset language for the On-screen
Display. It can be changed to English, German, Spanish,
Dutch, French, Italian, Swedish, Portuguese, Chinese,
Korean or Japanese.
(For use with the "Power" remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Language".
3 Press ∂/ƒ to select the desired language .
4 Press ENTER to save the setting. The On-screen
Display is now programed to display in the
language selected.
5 To exit from the GUI, press MENU.
The video input system mode is preset to "Auto";
however, it can be changed to a specific system mode,
if the selected system mode is not compatible with the
connected audiovisual equipment.
(For use with the "Power" remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Options".
3 Press ∂/ƒ to select "Video System", and then
press ©.
4 Press ∂/ƒ to select the desired video system
mode.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
• When the system mode is set to "Auto", you may not receive
a clear picture due to signal differences. Should this occur,
switch to the video system you are viewing.
MOUSE ADJ.
MOUSE ADJ.