Transporting The Projector - Sharp XG-NV5XB Operation Manual

Transporting the Projector

When transporting the projector, carry it by the carrying handle on the side. A soft-side carrying bag is also
provided to transport the projector.
Using the Carrying Handle
Carrying handle
Using the Carrying Bag
Projector
Inner pad
Carrying bag
Attaching the shoulder strap to the carrying bag
E-41
• Always put on the lens cap to prevent damage to the lens
• Do not lift or carry the projector by the lens or the lens cap
Before placing the projector into the carrying bag, set up
the inner pad inside the bag as shown.
• The supplied carrying bag is made exclusively for the
• This bag is provided merely to transport the projector and
• Wait until the projector has sufficiently cooled before placing
Take the shoulder strap
1
out.
The shoulder strap is stored in
the pocket located in front of
the carrying bag.
CAUTION
when transporting the projector.
as this may damage the lens.
CAUTION
projector and its supplied accessories. Do not place other
items into the carrying bag with the projector or use the
bag to transport items other than the projector and its
accessories.
its accessories, not to protect these products from damage
as a result of rough handling. Do not expose these products
to shocks or impact when transported in the carrying bag.
it into the carrying bag. If the projector is placed into the
bag while it is still hot, the heat may damage the bag lining.
Fasten the shoulder strap
2
to the carrying bag.
Follow the same procedure for the
other end of the strap.
2 1 / (6 cm)
2
The strap should
extend at least
1
2 ⁄ (6 cm) from
2
the buckle.