Description Of Each Menu - BenQ W700 User Manual

Description of each menu

FUNCTION
Wall Color
Aspect Ratio
Auto
Keystone
Keystone
Position
Phase
H. Size
Digital Zoom
3D Sync
3D Format
3D Sync
Invert
DESCRIPTION
Corrects the projected picture's color when the projection surface is
not white. See "Using Wall Color" on page 37
There are four options to set the image's aspect ratio depending on
your input signal source. See
details.
Corrects any keystoning of the image automatically. See
keystone" on page 33 for details.
Corrects any keystoning of the image manually. See
keystone" on page 33 for details.
Displays the position adjustment page. To move the projected image,
use the directional arrow keys. The values shown on the lower position
of the page change with every key press you made until they reach
their maximum or minimum.
This function is only available when a PC signal (analog RGB) is
selected.
Adjusts the clock phase to reduce image
distortion.
This function is only available when a PC signal
(analog RGB) is selected.
Adjusts the horizontal width of the image.
This function is only available when a PC signal (analog RGB) is
selected.
Magnifies or reduces the projected image. See
searching for details" on page 34
Enable 3D function.
If input timings Vsync is higher than 95Hz, 3D Format grays out.
If input timings Vsync is lower than 95Hz, 3D Format supports Frame
Sequential / Top-Bottom.
Invert 3D sync.
for details.
"Selecting the aspect ratio" on page 35
"Correcting
"Magnifying and
for details.
for
"Correcting
Operation 49