Optimizing The Image - BenQ W700 User Manual

Optimizing the image

Using Wall Color
In the situation where you are projecting onto a colored surface such as a painted wall which
may not be white, the Wall Color feature can help correct the projected picture's color to
prevent possible color difference between the source and projected pictures.
To use this function, go to the DISPLAY > Wall Color menu and press
color which is the closest to the color of the projection surface. There are several
precalibrated colors to choose from: Light Yellow, Pink, Light Green, Blue, and
Blackboard.
Selecting a picture mode
The projector is preset with several predefined picture
modes so that you can choose one to suit your
operating environment and input signal picture type.
To select an operation mode that suits your need, you
can follow one of the following steps.
• Press MODE/ENTER on the projector repeatedly
until your desired mode is selected.
• Go to the PICTURE > Picture Mode menu and
press /
Picture modes for different types of signals
The picture modes available for different types of signals are listed below.
1. Bright mode: Maximizes the brightness of the projected image. This mode is suitable
for environments where extra-high brightness is required, such as using the projector
in well lit rooms.
2. Living Room mode: Is designed for using the projector in a living room. The
brightness is emphasized in this model.
3. Gaming mode: Is designed for playing video games in a bright room.
4. Cinema mode: Is appropriate for playing colorful movies, video clips from digital
cameras or DVs through the PC input for best viewing in a blackened (little light)
environment.
5. User 1/User 2 mode: Recalls the settings customized based on the current available
picture modes. See
to select a desired mode.
"Setting the User 1/User 2 mode" on page 38
/ to select a
for details.
Operation 37