Table of Contents
Advertisement
Problem
The projector cannot be operated
with the remote control.
The STATUS indicator blinks in red.
An error code is displayed.
Make sure the remote control transmission unit is facing the light reception unit on the projector.
Check whether the batteries are still good. Replace with new batteries.
Check whether there is any obstructing object between the remote control and the light
reception unit on the projector.
Check whether you are outside of the remote control's effective range (7m).
Check whether the remote control cable has become disconnected, if you are using the remote
control by connecting with the remote control cable.
Your projector may have trouble. Please contact your dealer/distributor for instructions.
See the "Error Code List" (page 38).
Check these items
6. Appendix
35
Advertisement
Table of Contents
