Names Of The Projector Parts - NEC NC1500C User Manual

1-3. Names of the Projector Parts

1-3-1. Front of the Projector
2
1. Air outlet
Connects to an exhaust device to exhaust heat from the lamp. Please contact your dealer/distributor to install the exhaust
device.
2. Control panel
On the control panel, power to your projector is turned on or off, titles are selected, and various adjustments are made of
projected screen. (See page 8)
3. Connection terminals
Various image signal cable are to be connected here. (See page 7)
You can expand signal input terminals by installing an optional multi-media switcher (MMS).
4. Touch panel mounting opening (three position on top)
Use the holder arm for the touch panel to attach the touch panel (optional).
5. Lens (optional)
Images are projected from the lens. Request your dealer/distributor to install or replace the lens.
6. AC power cord (For projector)
This is the cord that supplies AC power to the projector head. The AC power cord is not an accessory. Consult with your
dealer/distributor about the AC power cord.
7. Interlock connector (Inside front of projector)
This is the connector for the projector safety device. This is used to control the projector from an external source. Consult
with your dealer/distributor about using this.
NOTE
Do not touch the air outlet and backside of the main unit when your projector is operating. Otherwise, the high
temperature may cause burns.
1. What's in the Box? and the Names of the Projector Parts
1
3
4
5
6
7
8
9
5