Table of Contents
Advertisement
4-2. Table of adjustment menus
Menus in parentheses are menus for our service personnel. Normally, these menus cannot be used.
Main menu
Title Select
"Title Memory Name"
TEST Pattern
Configuration
Lamp Setup
(Setup)
(Installation)
(Memory)
(Title Setup)
Macro Key
Information
Lamp
Macro Key
Usage
Error Code
Version
IP Address
MMS Status
Submenu
Selects the title of the signal to be projected.
Selects the test pattern to be projected.
Adjust
Adjusts lamp brightness.
Feedback
Sets the lamp brightness constant mode that uses a
brightness sensor.
Douser Mode
Selects whether to use the douser (screen mute) when
switching signals.
Turret
Controls the turret mounted with an anamorphic lens.
Ext. MMS Link
Sets whether to connect an external multi-media switcher (MMS).
Panel Key Lock
Locks the buttons on the projector's control panel so that
they cannot be operated.
GPIO Port
Selects the target of GPIO port control.
FactoryDefault
Returns the settings to their default values (only macro keys
and titles, or all settings).
Image Orient
Selects the projection method (front/rear).
Lens Center
Moves the lens shift position to the center.
MMS Select
Selects the multi-media switcher (MMS) to connect.
Baudrate
Sets the PC control connector (RS-232C) data transmission
speed (bps).
Date/Time
Sets the date and time on the projector.
(New Bulb)
Resets the lamp bulb usage time and selects or edits new
entries (only when the projector is in standby mode).
(Bulb Warning)
Sets the lamp bulb warning time (only when the projector is
in standby mode).
(New Lamp House)
Resets the lamp house usage time, and makes settings or
selects modes (only when the projector is in standby mode).
Bulb Alignment
Sets the lamp bulb alignment.
Lamp
Saves the current lamp setting.
Lens
Saves the current lens setting.
Macro Key No.1-8
Sets the titles to be assigned to the macro keys of 1 to 8.
Output
Displays the lamp output setting.
Bulb Type [A]
Displays the registered name and the maximum/minimum
current setting of the currently used lamp bulb.
Bulb Type [W]
Displays the registered name and the lamp rated output (kW)
of the currently used lamp bulb.
Bulb Type [H]
Displays the registered name and the lamp bulb warning time
(Bulb Warning Time) setting of the currently used lamp bulb.
Macro Key No.1-8
Displays the titles assigned to the macro keys of 1 to 8.
Displays the usage times of the projector, lamp bulb, lamp
house and bulb warning.
Displays the currently occurring error.
System
Displays the version of the projector head. (BIOS, Firmware,
Data, and Serial No.)
MMS(Built-in)
Displays the version of the built-in multi-media switcher (MMS).
(BIOS, Firmware, Data, FPGA, and Serial No.)
System
Displays the SYSTEM IP address.
Cinema
Displays the CINEMA IP address.
Displays the link-status of the connected multi-media
switcher (MMS).
4. Using Menus
Description
Reference
page
28
28
29
29
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
29
30
30
30
30
30
31
31
31
32
32
32
32
27
Advertisement
Table of Contents
