Cf_Ptimemode Command; Cf_Ptimer Command; Cf_Ptime Command; Cf_Ccaptiondisp Command - Canon LV-7392A Command List

LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M

8.10.16 CF_PTIMEMODE Command

Command "CF_PTIMEMODE_%1"[CR]
"COUNTUP" ---------------- Select Count up
%1
"COUNTDN" ---------------- Select Countdown
Set operation mode of P-timer.
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.10.17

CF_PTIMER Command

Command "CF_PTOMER_%1"[CR]
"START" ----------------------- Execute P-timer
"STOP" ------------------------ Pause P-timer
%1 "RESTART" ------------------ Restart P-timer
"RST" -------------------------- Reset P-timer
"EXIT" -------------------------- Terminate P-timer function
Control P-timer.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.10.18

CF_PTIME Command

Command "CF_PTIME_%1"[CR]
%1 "001" ~ "180" -----------Directly specify the timer by minutes.
Set Countdown timer for P-timer function.
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable

8.10.19 CF_CCAPTIONDISP Command

Command "CF_CCAPTIONDISP_%1"[CR]
"OFF" ------------- Select Off
"CC1" ------------- Select CC1
%1 "CC2" ------------- Select CC2
"CC3" ------------- Select CC3
"CC4" ------------- Select CC4
Select channel of Closed caption.
The status set with this command is stored in EEPROM and its setting is effective
even after ALL is OFF.
Details This command is available in normal Power ON status.
Closed caption is available under conditions below;
Entered signal is appropriate (Video, NTSC signal of S-video) and System is fixed
to NTSC i.
Acceptable
Response
Unacceptable
Expand Serial Command Functional Specifications
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
-35-